Merry Craftmas! We've got a DIY sure to make someone smile on Christmas. This cute little Shiba pop-up card is a simple and fun printable project. Materials and templates listed below. The template is in PDF format for hand-cutting.
>>>DOWNLOAD Shiba Christmas Card PDF HERE<<<
Watch the Assembly Video Here:
https://youtube.com/shorts/cnwny61rs-0?si=2_ahv9-E6YsHjkvH
Materials:
- Matte Photo Paper or Cardstock (US letter or A4, 260gsm-280gsm)
- Colour printer
- Scissors
- Glue or double-sided tape.
Instructions:
1) Print the inside card design on heavy weight matte photo paper or cardstock (We used 260gsm). Feed paper through the rear paper feeder. To print the outside of the card, flip the paper over and feed it through the rear paper feeder.
2) Cut out all the card elements. And crease all the connector tabs.
3) Apply glue or double-sided tape to the tree connector tab and attach it to the inside of the card. Next attach Shiba 1 ( Brown Shiba) to the sector connector piece off the tree. Lastly attach the Shiba 2 connector to the inside of the card. Fold the card down to check that the pieces fold nicely and do not distort. ( See reel)
4) Fold the center bow so that both ends meet. Attach it to the base of the bow. Wrap the middle section around both pieces to complete the bow. Attach the bow to the top outside of the card.
Voila! A cute homemade Christmas card ready to gift!
Thanks so much for following along, to keep up to date with all things LalaShiba please join us on instagram @lalashibadesigns
*This project is for personal use only.
